Modern Farmhouse Mini Pendant Light with White Ceramic Cylindrical Shade, Brass E26 Socket with On/Off Switch, Hardwired Hanging Lamp for Vanity, Kitchen Sink Lighting Bar Counter

This ceiling-wired pendant uses a ceramic shade for a calm, matte look and a brass E26 socket for a clean mechanical interface. A rotary knob on the socket gives local on/off control—useful over a bedside table or reading corner. The fixture connects to a standard junction box with the included 4.72″ canopy and US bracket. E26 socket, up to 60 W, Choose a warm bulb for ambience or a neutral bulb for task lighting. The compact profile works as a single accent or in a row above counters and islands. FAQ **Q1: Is this fixture hardwired or plug-in?** A: Hardwired. It connects to a ceiling junction box. A rotary on/off knob is located on the socket for local control. **Q2: What if my junction box is not centered?** A: The canopy covers the box only; it does not provide lateral offset. If you need to swag the fixture, use a separate ceiling hook rated for the load and route the cord accordingly (follow code). **Q3: What bulbs fit?** A: E26 base bulbs up to 60 W (LED or incandescent). Bulb not included. Common shapes: A19, ST64, G25. **Q4: What color temperature should I choose?** A: 2700–3000 K for ambient warmth; ~3500–4000 K for task-oriented light. **Q5: Is the cord adjustable?** A: Yes. The 150 cm / 59″ braided cord can be shortened during installation to set the hanging height. **Q6: What size ceiling box does it fit?** A: The 4.72″ (12 cm) round canopy and included US mounting bracket fit most 3–4″ round junction boxes. **Q7: Can it be installed on a sloped/angled ceiling?** A: Yes, as long as the junction box and bracket are secure and local code allows. Adjust the drop so the shade hangs vertical. **Q8: Is it damp-rated for bathrooms?** A: It is intended for **indoor dry locations**. For damp areas, follow local code and consult a licensed electrician. **Q9: Voltage and regions?** A: 110–120 V AC (US/CA). For regions using 220–240 V, use a version designed for that voltage; step-down transformers are not recommended for permanent lighting. **Q10: Can I use smart bulbs?** A: Yes, if they are E26 and rated for enclosed or semi-enclosed fixtures as required by the bulb maker. For smart-dimming, keep the socket switch ON and control via the app or smart wall dimmer/relay designed for your bulb. **Q11: Does the on-socket rotary switch replace a wall switch?** A: It provides local on/off control at the fixture. Many users leave it ON and use a wall switch for daily use. **Q12: How many pendants over a kitchen island?** A: Common layouts use 2–3 pendants. Typical spacing is **24–30″ center-to-center**, with the bottom of the shade **28–36″ above the countertop** (adjust to room height and sightlines). **Q13: What’s included in the box?** A: Pendant with ceramic shade and brass E26 socket (rotary switch), 4.72″ canopy, US mounting bracket, screws, wire connectors, quick guide. Bulb not included. **Q14: Can I shorten the cord myself?** A: Yes, during installation. Power must be off at the breaker. If unsure, use a licensed electrician. **Q15: Cleaning and care?** A: Turn power off. Wipe the ceramic shade with a soft dry or slightly damp cloth; avoid abrasive pads and solvents. Let the shade dry fully before re-energizing. **Q16: Can I mix this with other pendants?** A: Yes. Maintain consistent hanging height and spacing. Use the same color temperature bulbs to keep the scene uniform. **Q18: Is a bulb with >60 W allowed if it’s LED “equivalent”?** A: The fixture rating refers to actual power draw. LED bulbs labeled “60 W equivalent” typically draw 8–10 W, which is within the limit. Do not exceed the **60 W actual** rating. **Q19: Can I use a glass Edison bulb that gets hot?** A: Yes, if E26 and within 60 W actual power. Ensure adequate ventilation and keep combustible materials away from the shade opening.

• 【 Materials & Light Direction 】：Fluted ceramic shade with an opaque body that sends light downward to the work surface and keeps side-glare low; paired with a brass E26 lampholder and gold braided fabric cord for a clean, tactile build
• 【 Hardwired with On-Socket Switch 】: Installs to a ceiling junction box and includes a rotary on/off knob on the socket for local control. Works with a wall switch when you leave the socket switch ON
• 【 Mounting & Sizing Details 】: Canopy Ø12 cm / 4.72″ with US mounting bracket fits common 3–4″ round boxes. Cord length 150 cm / 59″; shorten during install to set the drop. Typical clearances: over countertops 28–36″ from counter to fixture bottom; over dining tables 30–36″ (adjust to room height and sight lines
• 【 Bulb Guidance (E26, up to 60 W) 】Accepts E26 LED or incandescent bulbs (not included). Suggested shapes: A19, ST64, or G25 depending on look. Pick 2700–3000 K for ambient warmth or 3500–4000 K for task focus. Use “dim-to-warm” LEDs if you want warmer tones at lower brightness
• 【 Use Cases & Limits 】: For indoor dry locations. Hang a single pendant for a reading/coffee nook or space two to three in a row above an island (typical spacing 24–30″ center-to-center; adjust to island length). Suitable for kitchens, dining bars, bedside corners, entries, studios, and small retail displays